Working with Sync Rules
Sync Exceptions are rules, contained in the Sync Exception Table, that define how synchronization works for specified connections or connection types. A Sync Exception rule applies and the specified action occurs if the connection matches all parameters in the rule definition. Rules are examined in sequence. The first matching rule applies.
These are the parameters contained a Sync Exception rule:
Parameter
|
Description
|
Idx
|
Rule sequence number. Rules are applied in sequence, starting with rule 1.
|
VS
|
One or more Virtual System contexts.
|
Source
|
Source IP address and subnet mask.
|
Destination
|
Destination IP address and subnet mask.
|
DPort
|
Destination port.
|
Ipp
|
IP protocol number - typically http (6) or udp (17).
|
ync
|
Synchronization action:
0 = No synchronization
1 = Synchronize only to the local Chassis
2 = Synchronize only to the other (remote) Chassis
3 = Synchronize both Chassis
4 = Synchronize all SGMs
|
Delay
|
Time that it takes for connections created from templates to synchronize.
|
|
|
