SSM60

To run the validation test:

1. Connect to the SSM using telnet.

   The default password is admin.

2. Use Enable Mode:

   > en

3. Show the running configuration:

   # show run

4. Make sure that all applicable interfaces (downlinks and front panel ports) show the required packet size limit.

   # telnet 198.51.100.32

   Trying 198.51.100.32...

   Connected to 198.51.100.32.

   Escape character is '^]'.

   User Access Verification

   Password:

   FI_cp>en

   #show run

   .

   .

   .

   !

   interface 1/2/1

   flow-control disable

   packet-size-limit 9146

   !