Configuring the Interface Distribution Mode (set distribution interface)

You can use these commands to:

Set the Distribution Mode for an interface when the system is not working in the General mode.
Show the currently assigned Distribution Mode and whether that mode is assigned by Auto-Topology or manually configured.

Syntax

> set distribution interface <if_name> configuration user|network|policy

> show distribution interface <if_name> configuration

Parameter	Description
`<`if_name`>`	Interface name as assigned by the operation system
`user`	Manually assign the user Distribution Mode
`network`	Manually assign the network Distribution Mode
`policy`	Use Auto-Topology to assign the automatically assign Distribution Mode according to the policy

Example

This example shows how to:

Manually change the Distribution Mode for interface eth1-01 from policy to network.
Change the Distribution Mode on interface eth1-01 from network to policy:
> set distribution interface eth1-01 configuration network

1_01:

configuration update completed successfully

1_02:

configuration update completed successfully

1_03:

configuration update completed successfully

> set distribution interface eth1-01 configuration policy

1_01:

configuration update completed successfully

1_02:

configuration update completed successfully

1_03:

configuration update completed successfully

Send Feedback