Heroku Enterprise

Prerequisites

  • An active Harmony SASE Administrator Portal account and network.

  • Make sure you have installed the Harmony SASE Agent on your devices.

  • Administrator account in the Firewall/ Router/ Cloud Management Portal.

Configuration Steps

After you obtain your private Harmony SASE gateway, to set up a VPN gateway for the Private Space, run:

Copy 
* Shell
Copy 
Copy ```
heroku spaces:vpn:connect \
     --name   perimeter81 \   --ip   PUBLIC_IP_OF_YOUR_VPN_GATEWAY \   --cidrs     '10.255.248.0/21'   \   --space   SPACE

Setting up the gateway takes a few minutes. Run the Wait command to wait for the gateway to be ready:

Copy 
* Shell

Copy ```
heroku   spaces  :vpn  :wait   --space    SPACE   perimeter81

When the gateway is ready, to get the configuration, run:

Copy 
* Shell

Copy ```
heroku   spaces  :vpn  :info   --space    SPACE   perimeter81

The above command returns a table that contains all the details you need to configure Harmony SASE.

Sample output:

* Text
Copy ```
heroku spaces:vpn:info --space SPACE perimeter81
=== SPACE VPNs
VPN Tunnel  Customer Gateway  VPN Gateway    Pre-shared Key  Routable Subnets  IKE Version
──────────  ────────────────  ───────────── ──────────────  ────────────────  ───────────
Tunnel 1 52.91.173.226 34.203.187.158 abcdef12345     10.0.0.0 /16 1 Tunnel 2 52.91.173.226 34.227.70.143 123456abcdef    10.0.0.0 /16 1