SASE

Note - The integration that enables using SASE as an identity source for Identity and Trust is currently available only through the Early Availability program. To activate this feature, contact your SASE Customer Success Manager or local Account Manager.

SASE users who use Identity and Trust can establish a direct integration between these two services. This integration enables Identity and Trust to retrieve connected users and devices information from SASE.

Through this connection, administrators can seamlessly extend Identity and Trust’s capabilities to acquire identities already connected to SASE.

To connect SASE to Identity and Trust:

1. Access the Identity and Trust Administrator Portal.

2. From the left navigation panel, click Integrations.

3. On the Integrations page, locate the SASE card and click Connect.

   Note - If the SASE card is not visible, click the icon > Identity Integrations > SASE and click Connect.

   The status of the SASE card is now Active and integrated with Identity and Trust.

To monitor the SASE integration:

Card Status	Description	Action Required
Inactive	The SASE service is available but not connected to Identity and Trust.	Connect the integration to enable full functionality.
Active	The SASE service is active and operating with a valid license.	No action needed unless there is a change in the service.
Action Required	Indicates a problem occurred during the integration connection process.	Click the Connect to retry connecting the integration.
License Expired	The license for SASE has expired.	Renew the license to restore the integration. See the (missing or bad snippet).

To disable the SASE integration:

1. Navigate to the SASE integration card and click the card options.

2. Select Disconnect.

   The SASE card status now shows SASE as Inactive.