set wlan security-type

In the R82.00.X releases, this command is available starting from the R82.00.00 version.

Description

Configures the WLAN security type for the first wireless network that was created.

Syntax

set wlan security-type <security-type>

Parameters

Parameter

Description

security-type

Specifies the WLAN security type:

  • WPA/WPA2 - WPA/WPA2

  • WPA3 - WPA3 (most secure)

    Note - This value is supported starting from the R81.10.05 version.

  • WPA2 - WPA2

  • none - None

Example Command

set wlan security-type WPA2