set vpn site add link-selection-multiple-addrs

In the R82.00.X releases, this command is available starting from the R82.00.00 version.

Description

Adds IP addresses to an existing remote VPN site. This allows High Availability or Load Sharing between the remote links using the link selection functionality.

Syntax

set vpn site <site> add link-selection-multiple-addrs addr <link-selection-multiple-addrs addr>

Parameters

Parameter	Description
link-selection-multiple- addrs addr	Configures the IP address.
site	Specifies the Site name. Press the TAB key to see the available options.

Parameter

Description

link-selection-multiple-

addrs addr

Configures the IP address.

site

Specifies the Site name.

Press the TAB key to see the available options.

Example Command

set vpn site site17 add link-selection-multiple-addrs addr 192.168.1.1