set stateful-inspection advanced-settings fw-drop-out-of-state-icmp

In the R82.00.X releases, this command is available starting from the R82.00.00 version.

Description

Controls whether to drop or accept the out-of-state ICMP packets.

Syntax

set stateful-inspection advanced-settings fw-drop-out-of-state-icmp {0 | 1}

Parameters

Parameter	Description
fw-drop-out-of-state-icmp	Drops (`1`) or accepts (`0`) the out-of-state ICMP packets. The default is `1`.

Parameter

Description

fw-drop-out-of-state-icmp

Drops (1) or accepts (0) the out-of-state ICMP packets.

The default is 1.

Example Command

set stateful-inspection advanced-settings fw-drop-out-of-state-icmp 1