set vpn remote-access default-access-to-lan

In the R82.00.X releases, this command is available starting from the R82.00.00 version.

Description

Configures settings for Remote Access VPN.

Syntax

set vpn remote-access [ default-access-to-lan <default-access-to-lan> ] [ mode <mode> ] [ track <track> ] [ mobile-client <mobile-client> ] [ sslvpn-client <sslvpn-client> ] [ l2tp-vpn-client <l2tp-vpn-client> ] [ l2tp-pre-shared-key <l2tp-pre-shared-key> ]

Parameters

Parameter	Description
default-access-to-lan	Allow traffic from Remote Access clients (by default) Options: block, accept
l2tp-pre-shared-key	L2TP Pre-Shared Key A string of alphanumeric characters without space between them: `a-z` (lower-case letters) `A-Z` (upper-case letters) `0-9` (digits)
l2tp-vpn-client	Enable Remote Access VPN clients to connect via native VPN client (L2TP) Type: Boolean (true/false)
mobile-client	Enable Remote Access VPN mobile clients to connect via Check Point Mobile VPN client Type: Boolean (true/false)
mode	Enable Remote Access VPN Type: Boolean (true/false)
sslvpn-client	Enable Remote Access VPN clients to connect via SSL VPN Type: Boolean (true/false)
track	Log traffic from Remote Access clients (by default) Options: none, log

Example Command

set vpn remote-access default-access-to-lan block mode true track none mobile-client true sslvpn-client true l2tp-vpn-client true l2tp-pre-shared-key MySharedKey