Miscellaneous - Gaia Embedded OS

Currently, there is no such plan, but we are constantly working to improve the Quantum Spark Clish and align some of the commands with the maintrain Gaia Clish commands.

Currently, this is not on the roadmap.

If there is a specific scenario, submit a Request for Enhancement (RFE) as described in sk71840.

All Quantum Spark firmware images are based on the Gaia Embedded OS.

The Quantum Spark Gaia Embedded OS is based on the code from maintrain development and is periodically aligned to latest maintrain code base.

However, Quantum Spark has unique capabilities (e.g., WiFi, 5G, LAN switch, and so on), while other capabilities are unique to Maintrain (e.g., Data Loss Prevention, Threat Extraction, and so on).

To reboot the appliance, use one of these:

• In WebUI:

  1. Navigate to Device view.

  2. Click the System Operations page.

  3. Click Reboot.

• In Gaia Clish, or the Expert mode:

  Run this command: reboot

If you do not plan to use the appliance for a long time, we recommend that you shut it down.

You must shut down the appliance before you replace a hardware component.

To shut down the appliance:

Model	Instructions
2000, 1900 1800, 1600 1555, 1550 1535, 1530	Use the Power button on the rear panel to power off the appliance.
1595R, 1595, 1590 1575, 1570R, 1570 1400 1200R 1100 900 700 600	Disconnect the power cable from the rear panel to power off the appliance.

For more information, see the Getting Started Guide for your appliance model in sk96246 - Documentation For Check Point Appliances.

Note - Shutting down the appliance does not cause the file system corruption.