Front Panel

Wired

WiFi

Note - There is only one set of LEDs. These LEDs show different colors depending on what activity is occurring.
Table: LEDs

Key

Item

Icon

Description

1

WiFi LED

(WiFi models only)

  • Off - WiFi off

  • Blue - WiFi on and operates normally

  • Red - WiFi error/alert

2

Management LED

  • Off - No management

  • Colors - See below

3

Internet LED

  • Off - No internet connection

  • Blinking Blue - Trying to connect to the internet.

  • Blue - Connected

  • Blinking Red - Connection failure

4

Power LED (Status)

  • Solid Blue - Normal operation

  • Blinking Blue - Boot in progress and installing firmware. After the process completes, the LED is solid blue.

  • Red - Error/Alert

    Note - This LED is red when the appliance is first turned on.

Management LED

The Management LED shows the status of the retries mechanism:

Action

Management LED Activity

Zero Touch is running.

Blinks red (slowly)

Successfully connected to Zero Touch Cloud Server and saved the deployment script.

Blinks red (rapidly)

Zero Touch process is completed. SMP activation is not needed.

Off

Activation sleeping time.

Blinks blue (slowly)

Reactivation.

Blinks blue (rapidly)

SMP is connected.

Solid blue

SMP mode is off.

Off

Gateway failed to connect to the SMP and will exit from the retry script.

Solid red

Wait times before retry:

Failure

Waiting Time

1st

2 minutes

2nd

4 minutes

3rd

8 minutes

4th

16 minutes

Subsequent

Retries every 16 minutes until Cloud Services are successfully activated

Network LEDs

The table below describes the network LEDs (RJ45 WAN and LAN ports).

Each port uses a bi-color LED to reflect the link/activity and speed.

RJ45

LED1 (Green)

LED2 (Amber)

No link

Off

Off

1G link

On

Off

1G Act

Blink

On

100M link

On

Off

100M Act

Blink

Off

10M link

On

Off

10M Act

Blink

Off