Front Panel
|
Note - There is only one set of LEDs. The LED color (blue / red / purple) depends on what activity occurs. |
Management LED
The Management LED shows the status of the retries mechanism:
Action |
Management LED Activity |
---|---|
Zero Touch is running. |
Blinks red (slowly) |
Successfully connected to Zero Touch Cloud Server and saved the deployment script. |
Blinks red (rapidly) |
Zero Touch process is completed. SMP activation is not needed. |
LED off |
Activation sleeping time. |
Blinks blue (slowly) |
Reactivation. |
Blinks blue (rapidly) |
SMP is connected. |
Solid blue. |
SMP mode is off. |
LED off |
Gateway failed to connect to the SMP and will exit from the retry script. |
Constant red. |
Wait times before retry:
Failure |
Waiting Time |
---|---|
1st |
2 minutes |
2nd |
4 minutes |
3rd |
8 minutes |
4th |
16 minutes |
Subsequent |
Retries every 16 minutes until Cloud Services are successfully activated |
Network LEDs
The table below describes the network LEDs (RJ45 WAN and LAN ports and the SFP).
Each port uses a bi-color LED to reflect the link/activity and speed, from 10M to 1GbE.
Speed |
Link |
Activity |
Link/Act LED1 Left |
Speed LED2 Right |
---|---|---|---|---|
No link |
![]() |
![]() |
No LED |
No LED |
1G |
Yes |
No |
Solid Green |
Solid Amber |
1G |
Yes |
Yes |
Blinking Green |
Solid Amber |
100M |
Yes |
No |
Solid Green |
No LED |
100M |
Yes |
Yes |
Blinking Green |
No LED |
10M |
Yes |
No |
Solid Green |
No LED |
10M |
Yes |
Yes |
Blinking Green |
No LED |
Speed |
Link |
Activity |
Link/Act LED1 Left |
Speed LED2 Right |
---|---|---|---|---|
No link |
|
|
No LED |
No LED |
10G |
Yes |
No |
Solid Green |
Solid Amber |
10G |
Yes |
Yes |
Solid Green |
Solid Amber |
1G |
Yes |
No |
Solid Green |
Solid Green |
1G |
Yes |
Yes |
Solid Green |
Solid Green |