Mounting the Appliances in a Rack

You can install your Smart-1 7000-L Appliance with the Telescopic Rails hardware. See Rack Mounting for Check Point Appliances for the procedure.

Appliance Specifications - Smart-1 7000-L

Appliance

Regulated Model

Width

Depth

Height

U

Maximum

Operating

Temperature

AC PSU Electrical

Specifications

DC PSU Electrical

Specifications

Smart-1 7000-L

SM-CP-7L10-1

438 mm

607.55 mm

88.60 mm

2U

32°F - 104°F
0°C - 40°C

100 - 127VAC (12A),
200 - 240VAC (7.5A)
50 - 60Hz

From -48 to -60VDC (30.5A)

Appliance Air Vents - Smart-1 7000-L

When the appliance is mounted in a rack, make sure that the appliance air vents have sufficient airflow from front to rear.

Important - If the appliance vents are blocked, the appliance can become too hot and be damaged.

The appliance and rack rails were tested in extreme conditions and when properly installed do not block air flow to the appliance.

These appliances are specifically designed to install with the rails described in Rack Mounting for Check Point Appliances