Ports
This section described different hardware ports.
MGMT Ports
The RJ45 Ethernet ports with the label MGMT or 
provide access to the Gaia OS on the Quantum Maestro Orchestrator A scalable Network Security System that connects multiple Check Point Security Appliances into a unified system. Synonyms: Orchestrator, Quantum Maestro Orchestrator, Maestro Hyperscale Orchestrator. Acronym: MHO..
By default, this port is configured with these settings:
-
IP address 192.168.1.1 and Net Mask 255.255.255.0
-
Auto-negotiation capabilities (100 MbE to 1 GbE)
Notes:
-
For more information, see the:
-
In MHO-140, the second MGMT port is not configured with an IP address.
-
To change the default IP address:
-
Connect to the Quantum Maestro Orchestrator
See "Maestro Orchestrator". over the RJ45 console port. -
Log in to Gaia Clish.
-
Configure the applicable IPv4 settings on the interface
Mgmt1.In MHO-140, the interface
Mgmt2is optional.
-
-
Make sure to use only FCC-compliant Ethernet cables.
|
Orchestrator
|
Location of the MGMT Port |
|
|---|---|---|
|
On the front panel |
On the rear panel |
|
|
MHO-175 |
|
N / A |
|
MHO-170 |
|
N / A |
|
MHO-140 |
N / A |
|
USB Port
The USB interface is USB 2.0 compliant (USB 1.0 is not supported).
It is possible to connect to this interface an external USB storage device for software upgrade or file management.
Do not use excessive force, when inserting or removing the USB storage device to and from the connector.
|
Orchestrator
|
Location of the USB Port |
|
|---|---|---|
|
On the front panel |
On the rear panel |
|
|
MHO-175 |
|
N / A |
|
MHO-170 |
|
N / A |
|
MHO-140 |
N / A |
|
Console Port
The port with the label 
or CONSOLE is an RJ45 console port that provides access to the Gaia OS on the Quantum Maestro Orchestrator.
|
Orchestrator
|
Location of the RS232 (Console) Port |
|
|---|---|---|
|
On the front panel |
On the rear panel |
|
|
MHO-175 |
|
N / A |
|
MHO-170 |
|
N / A |
|
MHO-140 |
N / A |
|
You use this port for initial configuration and debugging.
Use a Terminal application, such as PuTTY, SecureCRT, MobaXterm, and so on.
Use these settings to connect a PC to the RJ45 console port:
|
Parameter |
Setting |
|---|---|
|
Baud Rate |
9600 |
|
Data bits |
8 |
|
Stop bits |
1 |
|
Parity |
None |
|
Flow Control |
None |