Mounting the Appliances in a Rack

You can install your LightSpeed Appliance with the Telescopic Rails hardware. See Rack Mounting for Check Point Appliances for the procedure.

Appliance Specifications

Appliance

Regulated Model

Width

Depth

Height

U

Maximum Operating Temperature

PSU Electrical Specifications

QLS250

QL-20

17.40 in

(44.2 cm)

24.01 in

(61.0 cm)

3.46 in

(8.8 cm)

2U

32°F - 104°F
0°C - 40°C

from 100V (13.8A)

to 240V (8.5A),

47 - 63Hz

QLS450

QD-10

17.40 in

(44.2 cm)

24.01 in

(61.0 cm)

5.19 in

(13.2 cm)

3U

32°F - 104°F
0°C - 40°C

from 100V (10A)

to 240V (5A),

47 - 63Hz

QLS650,

QLS800

QD-15

17.40 in

(44.2 cm)

24.01 in

(61.0 cm)

5.19 in

(13.2 cm)

3U

32°F - 104°F
0°C - 40°C

from 100V (10A)

to 240V (5A),

47 - 63Hz

MLS200

QM-35

17.24 in
(43.80 cm)

22.83 in
(58.00 cm)

1.73 in
(4.40 cm)

1U

32° to 104°F
0° to 40°C

from 100V (5A)
to 240V (2.5A),
47-63Hz

MLS400

QP-25

17.40 in
(44.2 cm)

24.01 in
(61.0 cm)

1.73 in
(4.4 cm)

1U

32°F - 104°F
0°C - 40°C

from 100V (10A)
to 240V (5A),
47-63HZ

Appliance Air Vents

Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is mounted in a rack.

Important - If the appliance vents are blocked, the appliance can become too hot and it can be damaged.

The appliance and rack rails have been tested in extreme conditions and do not block air flow to the appliance.

These appliances are specifically designed to install with these rails.

The appliance shown is QLS800, but the air flow is the same for all appliances.