Declaration of Conformity MLS200

Name and address of the authorized trademark:	Check Point Software Technologies Ltd. 5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel.
Brand name:	Check Point
Marketing models:	MLS200
Regulated models:	QM-35
Manufacturer's name:	Check Point Software Technologies Ltd.
Manufacturer's address:	5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel.
Date first applied:	January 2020

The model of the declaration described above has been assessed and found to be in compliance with the following harmonized standards, regulations, and technical references:

Category	Technical Specification	Description
EMC	CE EN 55032: 2012/AC: 2013 Class A CISPR 32:2012	Information Technology Equipment - Radio Disturbance Characteristics
	EN 55024
	EN 61000-3-2: 2014	Information Technology Equipment - Harmonics Characteristics
	EN 61000-3-3: 2013	Information Technology Equipment - Harmonics Characteristics
	EN 55024: 2010+A1:2015	Immunity characteristics - Limits and methods of measurement
	IEC 61000-4-2: 2008	Information Technology Equipment - Flicker Characteristics
	IEC 61000-4-3: 2006	Information Technology Equipment - Radiated RF Immunity
	IEC 61000-4-4	Information Technology Equipment - Fast Transient Immunity
	IEC 61000-4-5	Information Technology Equipment - Surge Immunity
	IEC 61000-4-6	Information Technology Equipment - Conducted RF Immunity
	IEC 61000-4-8	Information Technology Equipment - Power frequency magnetic field immunity test
	IEC 61000-4-11	Information Technology Equipment - Voltage Dips and Short Interruptions Immunity
	IEC 61000-4-12	Information Technology Equipment - Ring wave immunity test
EMC	FCC/IC FCC: FCC Part 15, Subpart B Class A ANSI C63.4-2014 ANSI C63.4a.2017 ICES-003 Issue 7: 2016	Information Technology Equipment - Radio Disturbance Characteristics
	AS/NZS CISPR 32: 2013 CISPR 32: 2012 (Ed 1.0)	Information Technology Equipment - Radio Disturbance Characteristics
	VCCI-CISPR 32: 2016	Information Technology Equipment - Radio Disturbance Characteristics
RoHS	2011/65/EU	RoHS Directive
Safety	UL GS / IEC 60950-1: 2005 (Second Edition)+Am 1:2009+Am 2: 2013 EN 62368-1 : 2014	Information technology equipment. Safety General requirements, CE LVD
	UL/ULc 60950-1 UL 62368-1	Information technology equipment Safety General requirements

Date and Place of issue: January, 2020, Tel Aviv, Israel - QM-35

European Union (EU) Electromagnetic and Safety Compatibility Directive

This product is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directives 2004/108/EC and 2014/30/EU.

This product is in conformity with Low Voltage Directives 2006/95/EC and 2014/35/EU.

This product complies with the requirements in the Council Directives 2006/95/EC and 2014/35/EU relating to electrical equipment designed for use within certain voltage limits and the Amendment Directive 93/68/EEC.

Federal Communications Commission (FCC) Notice (US)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Canadian Department Compliance Statement

This device complies with Industry Canada ICES-003 rules. Cet appareil est conforme aux normes NMB003 d'Industrie Canada.

Japan Class A Compliance Statement:

This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.

GS Safety Notice