Installing AC Power Supply Units

AC Power Supply UnitsClosed Hardware component that supplies AC power with filtering and over-current protection. Acronym: PSU. are pre-installed in the Chassis.

You can swap in more units, or replace these units, without interfering with the operation of the Chassis.

Warning - One AC PSU cannot supply sufficient power to support a fully populated Chassis.

To install an AC Power Supply Unit:

  1. Pull out the latch.

  2. Push in the Power Supply Unit until it locks in place.

  3. Push in the Power Supply Unit insertion latch.

  4. Make sure that the DC LED shows the green color.