Front Panel on the 61000 Chassis
|
Note - R81.20 and higher versions do not support this Chassis model. |
Item |
Description |
||||
---|---|---|---|---|---|
1 |
The Security Gateway Modules The Security Gateway Modules improve system performance. You can add or remove a Security Gateway Module without losing connections. If an SGM is removed or fails, traffic is sent to the other active SGMs. These SGM models are available for the 61000 Chassis (see sk93332):
For more information, see Security Gateway Module (SGM). |
||||
2 |
USB v2.0 ports for connecting a bootable USB drive to install a Check Point software ISO image. |
||||
3 |
The Chassis Management Modules If the CMM fails or is removed from the Chassis, the appliance continues to forward traffic, but hardware monitoring is not available. If you add or remove an SGM to or from the Chassis, it is not recognized.
A second CMM can be used to supply CMM High Availability.
|
||||
4 |
Control Panel that shows the status of the cooling fans. |
||||
5 |
Console ports for a serial connection to a specific SGM using a terminal emulation program. |
||||
6 |
The Security Switch Modules This SSM model is available for the 61000 Chassis (see sk93332):
For more information, see Security Switch Module (SSM). |
||||
7 |
You can install DC Power Entry Modules (PEMs), or AC Power Supply Units
|
||||
8 |
AC Power Supply Units (PSUs):
You can install AC Power Supply Units (PSUs), or DC Power Entry Modules (PEMs).
|
Diagram that shows numbers of slots and components: