Mounting the Appliances in a Rack
You can install your 9000 series Appliance with the rack mounting hardware. See Rack Mounting for Check Point Appliances for the procedure.
Appliance Specifications
|
Appliance |
Regulated Model |
Width |
Depth |
Height |
U |
Maximum Operating Temperature |
AC PSU Electrical Specifications |
DC PSU Electrical Specifications |
|---|---|---|---|---|---|---|---|---|
|
9800 |
RR2-CP-RM40-1 |
17.20 in (43.8 cm) |
20 in (50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (5.5A) |
-36 volts to -72 volts, 17 to 9 amps |
|
9700 |
RR2-CP-RM30-1 |
17.20 in (43.8 cm) |
20 in (50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (5.5A) |
-36 volts to -72 volts, 17 to 9 amps |
|
9400 |
RR2-CP-RM20-1 |
17.20 in(43.8 cm) |
20 in (50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (4A) |
-36 volts to -72 volts, 15 to 7 amps |
|
9300 |
RR2-CP-RM10-1 |
17.20 in (43.8 cm) |
20 in (50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (4A) |
-36 volts to -72 volts, 15 to 7 amps |
|
9200 |
RR2-CP-RS20-1 |
17.20 in(43.8 cm) |
20 in (50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (3A) |
N / A |
|
9100 |
RR2-CP-RS20-1 |
17.20 in(43.8 cm) |
20 in(50.8 cm) |
1.73 in (4.4 cm) |
1U |
32°F - 104°F |
From 100V (3A) |
N / A |
Appliance Air Vents
When the appliance is mounted in a rack, make sure that the appliance air vents have sufficient airflow from front to rear.
|
|
Important - If the appliance vents are blocked, the appliance can become too hot and be damaged. |
The appliance and rack rails were tested in extreme conditions and when properly installed do not block air flow to the appliance.
These appliances are specifically designed to install with these rails.
The appliance shown is 9800, but the air flow is the same for all appliances.
