Safety Instructions

• Lift the appliance with assistance. To avoid injury, do not attempt to lift the appliance by yourself.

• Opening or removing the appliance cover, while the appliance is powered on may expose you to a risk of electric shock.

• Do not operate the appliance without the cover for more than five minutes. Operating the appliance without the cover can result in component damage.

• Many repairs may only be done by a certified service technician. Only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the technical support.

• We recommend that you always use an antistatic mat and antistatic strap on your wrist, while working on components inside the appliance.

• To ensure proper operation and cooling, all bays in the appliance and cooling fans must be always populated with a component.

• For proper heat dissipation and cooling, Smart-1 6000-L/6000-XL appliances contain a cooling air shroud that covers the empty memory module sockets that are not occupied.

For more information, see the Enterprise Products Safety, Environmental, and Regulatory Information booklet supplied in the original appliance shipping carton.

Best Practice - We recommend that only experienced personnel install or remove hardware components. Installing or removing components incorrectly can permanently damage the Security Management Appliance.

Important - Make sure that you are electromagnetically grounded when working with hardware components of the appliance. ESD (electrostatic discharge) can damage the appliance.