Compliance Information

This appendix contains declaration of conformity, compliance, and related regulatory information.

Declaration of Conformity for 6000 and 7000 Appliances

Manufacturer's Name:	Check Point Software Technologies Ltd.
Manufacturer's Address:	5 Shlomo Kaplan Street Tel Aviv 6789159, Israel

Declare that under our sole responsibility the products

Model Number:	QS-15, QM-30
Product Options:	6500, 6800
Date First Applied:	January 2019

Conform to the following Product Specifications:

Date and Place of issue: January, 2019, Tel Aviv, Israel - QS-15, QM-30

Model Number:	QS-2, QM-1, QM-2, QM-35
Product Options:	6200, 6400, 6600, 6700, 6900, 7000
Date First Applied:	January 2020

Date and Place of issue: January, 2020, Tel Aviv, Israel - QS-2, QM-1, QM-2, QM-35

European Union (EU) Electromagnetic and Safety Compatibility Directive

This product is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directives 2004/108/EC and 2014/30/EU.

This product is in conformity with Low Voltage Directives 2006/95/EC and 2014/35/EU.

This product complies with the requirements in the Council Directives 2006/95/EC and 2014/35/EU relating to electrical equipment designed for use within certain voltage limits and the Amendment Directive 93/68/EEC.

Federal Communications Commission (FCC) Notice (US)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Department Compliance Statement

This device complies with Industry Canada ICES-003 rules. Cet appareil est conforme aux normes NMB003 d'Industrie Canada.

Japan Class A Compliance Statement:

This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.

GS Safety Notice