Compliance Information

This appendix contains declaration of conformity, compliance, and related regulatory information.

Declaration of Conformity

Manufacturer’s Name:	Check Point Software Technologies Ltd.
Manufacturer’s Address:	5 Ha'Solelim Street, Tel Aviv 67897, Israel

Declare that under our sole responsibility the products

Model Number:	PB-20 (5100 and 5200 appliances), PL-10, PL-20, PL-30
Product Options:	All
Date First Applied:	April 2016

Conforms to the following Product Specifications:

EMC	FCC, 47 CFR, Part 15, Class A IC, ICES-003, Class A	Information Technology Equipment - Radio Disturbance Characteristics
	VCCI , V-2/2015.04 , V-3/2015.04, Class A	Information Technology Equipment - Radio Disturbance Characteristics
	AS/NZS CISPR 22, Class A AS/NZS CISPR 32: 2012, Class A (from April 2017)	Information Technology Equipment - Radio Disturbance Characteristics
	EN 55022: 2010 / AC: 2011, Class A EN 55032: 2012 / AC: 2011, Class A (from April 2017)	Information Technology Equipment - Radio Disturbance Characteristics
	EN 61000-3-2: 2014	Information Technology Equipment - Harmonics Characteristics
	EN 61000-3-3: 2013	Information Technology Equipment - Harmonics Characteristics
	IEC 61000-4-2: 2008	Information Technology Equipment - Flicker Characteristics
	IEC 61000-4-3: 2006	Information Technology Equipment - Radiated RF Immunity
	IEC 61000-4-4	Information Technology Equipment - Fast Transient Immunity
	IEC 61000-4-5	Information Technology Equipment - Surge Immunity
	IEC 61000-4-6	Information Technology Equipment - Conducted RF Immunity
	IEC 61000-4-8	Information Technology Equipment - Power frequency magnetic field immunity test
	IEC 61000-4-11	Information Technology Equipment - Voltage Dips and Short Interruptions Immunity
	IEC 61000-4-12	Information Technology Equipment - Ring wave immunity test
RoHS	2011/65/EU	RoHS Directive
Safety	TUV, EN 60950-1:2006/A2:2013	Information technology equipment. Safety General requirements, CE LVD
	CB, IEC 60950-1(ed.2); am1; am2	Information technology equipment Safety General requirements
	UL/cUL, UL 60950-1, 2nd Edition CAN/CSA C22.2 No. 60950-1-07, 2nd Edition	Information technology equipment Safety General requirements

Date and Place of issue: April, 2016, Tel Aviv, Israel

European Union (EU) Electromagnetic and Safety Compatibility Directives

This product is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directives 2004/108/EC and 2014/30/EU.

This product is in conformity with Low Voltage Directives 2006/95/EC and 2014/35/EU.

This product complies with the requirements in the Council Directives 2006/95/EC and 2014/35/EU relating to electrical equipment designed for use within certain voltage limits and the Amendment Directive 93/68/EEC.

Federal Communications Commission (FCC) Notice (US)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,

   and

2. This device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Department Compliance Statement

This device complies with Industry Canada ICES-003 rules. Cet appareil est conforme aux normes NMB003 d’Industrie Canada.

Japan Class A Compliance Statement:

This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.

Declaration of Conformity

Manufacturer’s Name:	Check Point Software Technologies Ltd.
Manufacturer’s Address:	5 Ha'Solelim Street, Tel Aviv 67897, Israel

Declare that under our sole responsibility the products

Model Number:	PL-40
Product Options:	All
Date First Applied:	February 2017

Conforms to the following Product Specifications:

EMC	FCC/IC FCC 47 CFR Part 15 Subpart B, ICES-003 Issue 6-2016, Class A	Information Technology Equipment - Radio Disturbance Characteristics
	VCCI V-2/2015.04 &  V-3/2015.04, Class A	Information Technology Equipment - Radio Disturbance Characteristics
	RCM AS/NZS CISPR 32: 2013 CISPR 32: 2012 (Ed 1.0) Class A	Information Technology Equipment - Radio Disturbance Characteristics
	CE EN 55032: 2012 / AC: 2013 CISPR 32: 2012 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 55024: 2010+A1:2015 IEC 61000-4-2: 2008 IEC 61000-4-3: 2006 + A1: 2007 + A2: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 IEC 61000-4-11: 2004 IEC 61000-4-12: 2006	Information Technology Equipment - Radio Disturbance Characteristics Information Technology Equipment - Harmonics Characteristics Information Technology Equipment - Flicker Characteristics Information Technology Equipment - Radiated RF Immunity Information Technology Equipment - Fast Transient Immunity Information Technology Equipment - Surge Immunity Information Technology Equipment - Conducted RF Immunity Information Technology Equipment  - Power frequency magnetic field immunity test Information Technology Equipment - Voltage Dips and Short Interruptions Immunity Information Technology Equipment - Ring wave immunity test
RoHS	2011/65/EU	RoHS Directive
Safety	UL & cUL UL 60950-1 & CAN/CSA C22.2 No. 60950-1-07	Information technology equipment.  Safety General requirements, CE LVD
	CB IEC 60950-1(ed. 2); am1; am2	Information technology equipment.  Safety General requirements, CE LVD
	TUV GS CE LVD, EN 60950-1:2006/A2:2013 EK1-ITB 2000: 2016 AfPS GS 2014:01 PAK 3.1	Information technology equipment.  Safety General requirements, CE LVD

Date and Place of issue: February, 2017, Tel Aviv, Israel

European Union (EU) Electromagnetic and Safety Compatibility Directive

This product is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2014/30/EU).

This product is in conformity with Low Voltage Directive 2014/35/EU, and complies with the requirements in the Council Directive 2014/35/EU relating to electrical equipment designed for use within certain voltage limits and the Amendment Directive 93/68/EEC.

Federal Communications Commission (FCC) Notice (US)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,

   and

2. This device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Department Compliance Statement

This device complies with Industry Canada ICES-003 rules. Cet appareil est conforme aux normes NMB003 d’Industrie Canada.

Japan Class A Compliance Statement:

This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.