Mounting the Appliances in a Rack

You can install your 26000/28000/28600HS appliance with the Telescopic Rails hardware. For the procedure, see the .

Appliance Physical Specifications

These are the physical specifications of the Check Point appliance.

Appliance

Regulated Models

Width

Depth

Height

Maximum Operating Temperature

Electrical Specifications

28600HS

QP-20

17.40 in (44.2 cm)

24.01 in (61.0 cm)

1.73 in (4.4 cm) (1U)

32°F - 104°F
0°C - 40°C

100V(10A)-240V(5A), 47-63HZ

26000

QD-10

17.40 in (44.2 cm)

24.01 in (61.0 cm)

5.19 in (13.2 cm) (3U)

32°F - 104°F
0°C - 40°C

100V(10A)-240V(5A), 47-63HZ

28000

QD-15

17.40 in (44.2 cm)

24.01 in (61.0 cm)

5.19 in (13.2 cm) (3U)

32°F - 104°F
0°C - 40°C

100V(10A)-240V(5A), 47-63HZ

Appliance Air Vents

Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is mounted in a rack.

Important - If the appliance vents are blocked, the appliance can become too hot and it can be damaged.

The appliance and rack rails have been tested in extreme conditions and do not block air flow to the appliance. These appliances are specifically designed to install with these rails. Appliance shown is 26000, but air flow is the same for 28000 and 28600HS.